Digital Monitoring Products XR550 Guida Utente Scaricare il pdf (Pagina 21)

XR150/XR350/XR550 User Guide 17Arming and Disarming

Area System Disarming Operation

While the system is armed, you can only enter the premises

through an entry/exit delay door without causing an alarm. After

opening the door, the keypad sounds a prewarn tone to remind you

to disarm the system. You must disarm the system before the entry

delaytimeexpiresoranalarmonthedoorzoneoccurs.

Duringtheentrydelaytime,thekeypaddisplaysENTERCODE:and

thenameofthezonecausingtheentrydelay.Enteryourcodeto

disarmthesystem.Onlythoseareasassignedtoyourcodedisarms.

Note:Theprewarntonesilencesassoonastherstusercodedigit

key is pressed. If a valid user code is not entered or an invalid

usercodeisenteredwithinveseconds,theprewarntonebegins

sounding again.

Schedules: If you have programmed schedules for your system and

a code is entered outside of a schedule and that code does not have

authorizationtodisarmoutsideofschedules,thekeypaddisplays

INVALID TIME. This lets users know that they are attempting to

disarmoutsideoftheirauthorizedtime.

All or Selective Disarming: After entering your user code, the

system allows you to disarm either all of the areas to which you

have access or just selected areas. If you choose to disarm all

areas, the system automatically disarms them. If you choose to

disarm selected areas, the area names display on the keypad.

Alarm Display: After disarming, the keypad displays any zones

that tripped or any transmission problems that occurred dur ing the

armed period.All burglary zones are then disarmed and any by-

passedzonesareautomaticallyreset.

Disarmed Message: ThekeypaddisplaysALLSYSTEMOFFafterthe

system disarms.

Central Sta tion Report: Your system may be pre-programmed at

installation to transmit a system disarming report to the central

sta tion.

Door Access Disarming: Your system may be programmed to allow

area disarming when a card is presented to a door access reader

located outside of the building. Simply present your card to the

reader and after the card code is validated for the appropriate

authority, a door access is granted and your matching areas are

automatically disarmed. See the Easy Entry™ User’s Guide in

Appendix E.

Disarming the Area System from the keypad

1. Press the COMMANDkeyuntilARMDISARMdisplays.During

entry delay this process starts at step 3.

2. Select DISARM to disarm areas.

3. ThekeypaddisplaysENTERCODE:.Enteryourusercodeand

press COMMAND.ThekeypaddisplaysALL?NOYES.

4. SelectYEStodisarmallareasauthorizedforyourusercode.

 Select NO to disarm only certain areas individually. The

keypadthendisplays thenameofeachareaauthorizedfor

yourusercodefollowedbytheNOYESdisplay.

Select YES to disarm the area displayed.

 SelectNOtonotdisarmtheareaanddisplaythenextarea.

5. If you are disarming the system out of a normally scheduled

time and you have the authority to extend a schedule, the

keypadthendisplays2HR4HR6HR8HR.Selectthenumber

of hours to extend the schedule.

Note: If you do not have the authority to extend a schedule,

this option does not display.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR550 Guida Utente Pagina 21

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR550