Digital Monitoring Products XT50 Guida di Installazione Scaricare il pdf (Pagina 12)

XT Series Programming Guide Digital Monitoring Products

INTRODUCTION

1.9 Entering Non-Alpha Characters

To enter a space in an alpha entry, press the 9 digit key followed by the third Select key/area. The three

characters on the 9 digit key are Y, Z, and space. You can also enter the following characters: – (dash),

. (period), * (asterisk), and # (pound sign) using the 0 (zero) key and the four Select keys/areas from left

to right. For example, to enter a – (dash), press the 0 (zero) key and then the left Select key/area. A dash

now appears in the keypad display. The table below shows the character locations for DMP keypads.

Key Number Select Key 1 Select Key 2 Select Key 3 Select Key 4

1 A B C (

2 D E F )

3 G H I !

4 J K L ?

5 M N O /

6 P

R &

7 S T U @

8 V W X ,

9 Y Z space _

0 - . * #

1.10 Keypad Displays Current Programming

Each programming option displayed at the keypad shows the currently selected option in the panel

memory. These options are either shown as a number, a blank, or a NO or YES. To change a number or

blank to a new number, press any top row Select key or touch any Select Area. The current option is

replaced with a dash. Press the number(s) on the keypad you want to enter as the new number for that

option. It is not necessary to enter numbers with leading zeros. The panel automatically right justies the

number when you press the COMMAND key.

To change a programming option that requires a NO or YES response, press the Select key or touch the

Select Area for the response not selected. See Figure 8.

For example, if the current option is selected as YES and you want to change it to NO, on Thinline or

Aqualite keypads press the third top row Select key. On Clear Touch or Graphic Touchscreen keypads touch

Select Area 3. The display changes to NO. Press the COMMAND key to display the next option.

THEN

Press the black colored top

row Select key/area.

The keypad displays the new

selection. Press CMD to advance.

YESBELL TST

NOBELL TST

YESBELL TST

NOBELL TST

Thinline,

Aqualite,

Wireless

Keypads

Graphic

Keypads

Figure 8: Changing the Current Programming Option

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XT50 Guida di Installazione Pagina 12

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XT50