Digital Monitoring Products XT50 Guida di Installazione Scaricare il pdf (Pagina 36)

XT Series Programming Guide Digital Monitoring Products

ZONE INFORMATION

If you select Blank, Night, Day, Exit, Auxiliary 1, or Auxiliary 2 as the Zone Type, the

zone must be assigned to an area. If you select Fire, Panic, Emergency, or Supervisory as

the Zone Type, these are 24-hour zones that are always armed and no area assignment is

needed. Press COMMAND to continue.

Caution: When a sensor reset is performed at the keypad, power will drop to devices

connected to zone 10 causing the panel to sense an open condition on all zone types

other than Fire (FI), Fire Verify (FV), and Supervisory (SV). Whenever non-Fire and non-

Supervisory zone types are used on zone 10, make the appropriate adjustments to the

zone Armed Action to prevent false alarms from occurring.

Refer to the Appendix for zone type specications and descriptions.

Note: For listed installations using wireless zones, do not use the FV zone type.

14.6 Area Assignment

For Area systems, enter the area number from 1 to 6 where this zone is being assigned.

For All/Perimeter systems, choose INTERIOR or PERIMETER.

For Home/Away systems, choose INTERIOR, PERIMETER, or BEDROOMS

• INT (Interior) - Assigns the zone to area 2, Interior.

• BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only

displayed in Home/Away systems.

• PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.

14.7 Arming Zone Assignment

For Area systems, this option species the areas to be armed by the Arming Type zone.

Press the appropriate number keys on the keypad to assign areas 1 to 6. When disarmed,

all programmed areas are disarmed.

For All/Perimeter systems, choose PERIM or ALL. For Home/Away systems, choose HOME,

SLEEP, or AWAY.

Perimeter/All - Specify whether the arming zone arms just the Perimeter (PERIM) or the

Perimeter and Interior areas (ALL) for All/Perimeter systems. When disarming, all areas

are disarmed.

HOME/SLEEP/AWAY - Specify whether the arming zone arms the Perimeter (HOME), the

Perimeter and Interior (SLEEP), or all three areas (AWAY). When disarming, all areas are

disarmed.

Arming zone operation

If a bad (faulted) Priority zone is in the area being armed by an Arming zone, the arming

is stopped. If there are no Priority zones, or they are all in a normal condition, the

following applies:

When a non-Priority zone is bad when an area is armed with a keyswitch on an Arming

zone, the arming is delayed for ve seconds. If, during the ve-second delay, the

keyswitch is turned to disarm, the arming stops. If the keyswitch is held in the arming

position for the full ve seconds, the bad zone is force armed and the area is armed.

The ability to stop the arming does not apply if a wireless arming device is being used.

Refer to the Appendix.

Note: Arming from a zone, voice module, touch tone telephone, or Remote Link is not

affected by this operation.

14.7.1 Style

This option species the style for the arming/disarming operation. The default for

STYLE: is TGL (toggle). Pressing any Select key displays the STYLE options. To view more

style options press the command key. The following is a description of the action for

each option condition.

AREA NO: -

AREA: PERIMETER

INT BEDRM PERIM

AREA:

ARM AREA: PERIM

PERIM ALL

HOME SLEEP AWAY

STYLE: TOGGLE

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 54 55

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XT50 Guida di Installazione Pagina 36

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XT50