Digital Monitoring Products XR550 Manuale delle Istruzioni Scaricare il pdf (Pagina 15)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

INTRODUCTION

1.12 Keypad Displays Current Programming

Each programming option displayed at the keypad shows the currently selected option in the panel memory. These

options are either shown as a number, a blank, or a NO or YES. To change a number or blank to a new number, press

any top row Select key or touch any Select Area. The current option is replaced with a dash.

Press the number(s) on the keypad you want to enter as the new number for that option. It is not necessary to

enter numbers with leading zeros. The panel automatically right justies the number when you press the COMMAND

key.

To change a programming option that requires a NO or YES response, press the Select key or touch the Select Area

for the response not selected. See Figure 9.

For example, if the current option is selected as YES and you want to change it to NO, on Security Command,

Thinline, or Aqualite keypads press the third top row Select key. On Clear Touch or Graphic Touchscreen keypads

touch Select Area 3. The display changes to NO. Press the COMMAND key to display the next option.

THEN

Press the black colored top

row Select key/area.

The keypad displays the new

selection. Press CMD to advance.

YESBELL TST

NOBELL TST

YESBELL TST

NOBELL TST

Thinline,

Aqualite,

Wireless

Keypads

Graphic

Keypads

Figure 9: Changing the Current Programming Option

1.13 Multiple Displays

For many programming and user options, such as Area selections, Menu Displays, and Status Lists, there are

several displays containing programming. For example, when programming Menu Displays, keypads 1 through 16

display on two separate displays. First, keypads 1 through 8 display. Press the COMMAND key to display keypads 9

through 16. This same scheme is used for areas 1 through 32.

Note: Areas not pre-programmed at installation to display at this keypad cannot be viewed.

1.14 Asterisks in Programming

Asterisks display next to a programming option that is already selected. As shown in the example, options that are

selected to display the current programming selection have an asterisk next to the number. Those that are not

selected simply display the number. In the Devices example, keypads 3, 8, 9, and 15 are not selected. In the Areas

example, areas 3, 8, 9, 15, 19, 23, 25, and 31 are not selected. In both examples the numbers with asterisks are

selected.

*1 *2 3 *4

*5 *6 *7 8 *13 *14 15 *16

9 *10 *11 *12

Devices

*29 *30 31 *32

*13 *14 15 *16

9 *10 *11 *12

25 *26 *27 *28

*1 *2 3 *4

*5 *6 *7 8 *21 *22 23 *24

*17 *18 19 *20

Areas

To select or deselect a number, simply enter the number using the digit keys on the keypad. This same scheme is

used when viewing the panel armed status and other programming and operational functions. Remember to press

the COMMAND key to display the rest of the device or area numbers.

1.15 Compliance Instructions

This product incorporates eld-programmable software. Refer to the XR150/XR350/XR550 Compliance Listing Guide

(LT-1330) for additional compliance information.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR550 Manuale delle Istruzioni Pagina 15

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR550