Digital Monitoring Products XR550 Manuale delle Istruzioni Scaricare il pdf (Pagina 59)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

ZONE INFORMATION

Note: When more areas are selected at Arm/Disarm Areas than are authorized in the

User Prole, in the future the user can be given access authority to additional areas

through the User Prole without requiring additional panel programming to select Arm/

Disarm Areas. See User Proles in the Appendix or refer to the XR150/XR350/XR550

Series User’s Guide (LT-1278).

In an All/Perimeter or Home/Sleep/Away system, this species the area to be armed by

the Key Fob button being programmed. For All/Perimeter systems, choose PERIM or ALL,

for Home/Sleep/Away or Home/Away systems, choose HOME, SLEEP, or AWAY.

Note: Areas 3 and higher in an All/Perimeter system, and areas 4 and higher in a Home/

Sleep/Away system are not available for use.

After selecting the areas, for one-button key fobs the Zone No.: option displays. For

two-button or four-button key fobs, the Key Fob Button Selection option displays to

program additional buttons.

18.11.10 Output Number

You can specify any relay output/Favorite to operate when OUT (Output), PN (Panic),

PN2 (Panic 2), EM (Emergency), or EM2 (Emergency 2) is selected for a key fob Button

Action and the button is pressed. Valid range is 1 to 6, 500 to 999,

D1 to D16, F1 to F20, or G1 to G20. For an output turned on by a PN, PN2, EM, or EM2

button action, the output turns off when any area is disarmed.

To enter an output/Favorite number, press a top row Select key followed by the output/

Favorite number. Press the COMMAND key.

18.11.11 Output Action

This option allows you to dene the output action (STD, PLS, MOM, TGL, OFF) for the

selected output number. The default is Steady.

yyy = the name of the button being programmed (TOP, BTM, LFT, RGT).

xxxxxxxx = the currently dened output action.

STD (Steady) - The output is turned on and remains on.

PLS (Pulse) - The output alternates one second on and one second off.

The pulsing rate for a Model 716 relay attached to the LX-Bus is 1.6 seconds.

Note: Pulse is not available for key fob button output programmed D1 to D16 or G1 to

G20.

MOM (Momentary) - The output is turned on only once for one second.

TGL (Toggle) - The output alternates between the on state and off state. Each button

press toggles the output state.

Note: Toggle is not available for key fob button output programmed G1 to G20.

OFF (Off) - The output is turned off. If programmed, the output was turned on by some

other means such as another button press, a zone action, or a schedule.

Note: When the output is assigned to PN/PN2 or EM/EM2 button action and is turned

on, the output turns off when any area is disarmed.

When the output action is steady, pulse or toggle and the output is turned on, the

output remains on until:

— the output cutoff time expires

— the output is reset from the keypad menu

— toggled off

18.11.12 Next Zone

Select YES to return to the ZONE NO: - option to program a new zone. Select NO to

display the Alarm Action option.

Note: All wireless programming is stored in the panel. The 1100X Wireless Receiver

obtains the necessary programming information from the panel each time the receiver

powers up, when the programmer STOP routine is selected or the panel is reset. The

receiver memory refresh takes up to 10 seconds to complete depending on the number

of wireless zones programmed and the Red LED remains on during this time. Normal

receiver operation is inhibited during the memory refresh period.

You must also make these selections for the Disarmed Short, Armed Open, and Armed

Short zone conditions. Press COMMAND to continue.

ARM AREAS: PERIM

OUTPUT NO: XXX

OUTPUT ACTION:

yyy: XXXXXXXX

OUTPUT ACTION?

STD PLS MOM TGL

OUTPUT ACTION?

OFF

NEXT ZONE NO YES

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 77 78

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR550 Manuale delle Istruzioni Pagina 59

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR550