Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 25)

XRSuper6/XR20/XR40 Programming Guide Digital Monitoring Products

SySTem oPTionS

6.11

ZN ACTY HOURS:

Zone Activity Hours

This option allows you to monitor a person living alone for non-activity. Enter the

number of hours, 0 to 9, allowed to elapse without a disarmed zone being tripped

before a message is sent to the receiver. Default is 0 (zero). When the system is

disarmed, the timer begins to countdown the number of hours programmed. Each

time activity occurs, the timer restarts the countdown.

Before the countdown time expires, the keypad sounds a tone and PRESS ANY KEY

displays to allow the user to restart the activity timer. The duration of the tone is

the number of seconds programmed for Entry Delay 2.

Select the SUPV/TRBL receiver option in Receiver 1 or 2 programming to send S93

ALARM: User Activity Not Detected, S94 Alert: Activity Check Enabled, and S95 Alert:

Activity Check Disabled messages.

When an open/close schedule is programmed, the timer only counts down during

the scheduled open period. Also, when a schedule is programmed, if the timer is

counting down and the scheduled open time occurs, the timer resets and begins the

countdown again.

6.12

ARM ACTY DAYS:

Arm Activity Days

This allows you to select the number of days a countdown timer is set for area

arming and disarming activity. The range for the countdown timer is 00 to 99.

When the timer counts down to zero because of no area arming or disarming

activity, the panel sends a “No Arming/Disarming” message to the receiver at 10:

00 AM. Each time an area is armed or disarmed, the timer is restarted. When the

countdown timer expires because of no area arming or disarming activity, and a

message is sent, the timer does not restart until a panel reset occurs or an area is

armed or disarmed.

The SUPV/TRBL receiver option must be selected in Receiver 1 or 2 programming

for the message to be sent.

6.13

TIME CHG NO YES

Time Zone Changes

This option allows the panel to request automatic time changes from the DMP

SCS-1/SCS-1R Receiver. For the receiver to send time changes, it must be

programmed to send time changes and must be receiving time change updates from

the host automation computer at least every 24 hours. Default is YES.

HRS FROM GMT: 6

When time zone is programmed YES, enter the number (0-23) that indicates the

Greenwich Time zone (GMT) where the panel is located. The default is 6. See table

below for GMT values.

GMT

City/Time Zone GMT City/Time Zone

London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh 13 New Cadelonia

Cape Verde Island, Azores 14 Guam, Sydney

Mid-Atlantic, Fernando de Noronha 15 Tokyo, Seoul

Buenos Aires, Georgetown, Brasilia, Rio de Janeiro 16 Hong Kong, Singapore

Atlantic Time (Canada), Caracas, La Paz, Santiago 17 Bangkok, Hanoi

Eastern Time (US, Canada) Bogota, Lima, Arequipa 18 Dhaka, Almaty

Central Time (US, Canada), Mexico City, Saskatchewan 19 Islamabad, Karachi

Mountain Time (US, Canada), Edmonton 20 Abu Dhabi, Kazan

PacicTime(US,Canada),Tijuana 21 Moscow, Bagdad

Alaska 22 Eastern Europe

Hawaii 23 Rome, Paris, Berlin

Midway Island, Samoa

Fiji,MarshallIsland,Wellington,Auckland,Kwajalein,Kamchatka

6.14

TIME DISP NO YES

Time Display

YES allows the keypad to display the time and day in the Status List. When NO is

selected, time and day of the week are not displayed.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 25

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20