Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 33)

XRSuper6/XR20/XR40 Programming Guide Digital Monitoring Products

zone informaTion

Zone Information

11.1

ZONE INFORMATION

Zone Information

This allows you to dene the operation of each protection zone used in the system.

11.2

ZONE NO: -

Zone Number

Enter the number of the zone you intend to program. Press COMMAND to enter a

zone name. Refer to the Enter Alpha Characters section.

Keypad Address

Zone Numbers

XRSuper6 XR20 XR40

1 7-10 11-14 11-14

2 21-24 21-24 21-24

3 31-34 31-34 31-34

4 41-44 41-44 41-44

5 * * 51-54

6 N/A N/A 61-64

7 N/A N/A 71-74

8 N/A N/A 81-84

* Address 5 can be used with unsupervised keypads. This allows all

16 zones to be used by Zone Expansion Modules, such as a 714-16.

Note: Use zone numbers 31 to 34 or 41 to 44 with 1100 Series Key

Fobs or DMP wireless output modules.

Note: When any wireless input zone for a particular address is programmed

(Ex: 11-14 = Addr 1), the 1100D responds to the panel for this address. Other

devices, such as keypads or hardwired zone expanders, cannot use this address.

Zones connected directly to the panel cannot be wireless.

11.3

KEY FOB NO YES

Key Fob

Select YES to program an 1100 Series Key Fob for zones 31-34 or 41-44. When YES

is selected, programming continues at the 1100 Series Key Fobs Section. Default is

NO.

11.4

* UNUSED *

Zone Name

Press any Select key and enter up to 16 characters for the zone name. A name must

be given to each zone in the system. This name can be displayed at the keypads

when the zone is bad or viewed in Display Events. The zone name is also sent to the

receiver as part of a zone event report.

A zone that is not part of the system must be marked *UNUSED*. To mark a zone

unused, de lete the old name by pressing any Select key, then press the COMMAND

key. The pro grammer auto matically pro grams the name as * UNUSED *. If you

selected ZONES? NO YES to clear the panel’s memory during Initialization, the

zones will already be marked * UNUSED *. See the Initialization section.

11.5

ZONE TYPE: -

Zone Type

The Zone Type denes the panel’s response to the zone being opened or shorted.

See the Zone Types Specications chart.

When you assign a Zone Type to a zone, responses are made automatically for the

zone. There are 11 Zone Types to choose from including Blank. The func tional

details of each response are described in Zone Types Specication.

To select a new Zone Type, press any Select key. The display lists the four Zone

Types shown below. When the Zone Type you want to select displays, press the

Select key below the name.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 33

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20