Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 49)

XRSuper6/XR20/XR40 Programming Guide Digital Monitoring Products

aPPendiX

14.9 FA426 Wireless Operation

The FA426 is a 900MHz wireless receiver that installs in the enclosure of the XRSuper6/XR20/XR40

Command Processor and allows you to add up to 16 wireless expansion zones to the panel. A wire harness

included with the FA426 plugs into the receiver and connects to the keypad bus terminals on the panel.

Wireless points 2 through 16 are suitable for use with supervised wireless transmitters on doors or

windows as well as wireless smoke detectors, glassbreak detectors, and PIRs. No response from these

points after four hours is indicated by the panel as Missing.

Point 1 is unsupervised and designated for use with the FA113 Keychain Remote. The FA113 allows the

user to arm and disarm one or more areas of the system without using a keypad. The FA113 also contains

two ALERT buttons that allow the user to initiate a Panic alarm to the system. The unsupervised feature

of point 1 allows the FA113 to be removed from the premises without a Missing report being generated.

You can use any number of FA113 Keychain Remote devices on point 1 to allow for multiple users.

The FA426 can communicate wireless Alarm, Trouble, Missing, and Low Battery reports to the XRSuper6/

XR20/XR40 panel. The Alarm report is received as a short condition by the panel. The Trouble report

is received as an open condition by the panel. Zone information programming in the XRSuper6/XR20/

XR40 panel must be congured for these conditions. Missing and Low Battery reports require no special

programming.

Low Battery note: If a Low Battery condition on a transmitter is corrected by replacing the battery, a

Sensor Reset must be performed on the XRSuper6/XR20/XR40 system to clear the Low Battery message

from the keypad Status List.

FA426 connection to panel: If the connection is broken between the FA426 and the panel, any zone

monitored by the FA426 reports an open condition.

Wireless

Points

Zone Numbers Address 1 Zone Numbers Address 5

XRSuper6 Only XR20 and XR40 XR40 Only

1 7 11 51

2 8 12 52

3 9 13 53

4 10 14 54

5 21 21 61

6 22 22 62

7 23 23 63

8 24 24 64

9 31 31 71

10 32 32 72

11 33 33 73

12 34 34 74

13 41 41 81

14 42 42 82

15 43 43 83

16 44 44 84

1 2 ... 44 45 46 47 48 49 50 51 52

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 49

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20