Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 48)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

aPPendiX

The third column from the left is the second digit of the 2-digit event code sent to the receiver. The

fourth column (on the right) is what that character represents. See below:

1st

Digit

1st Digit

Description

2nd Digit 2nd Digit Description

1 Fire Alarm 1 to A, B, D Zones 1 to 10 (1 to A), Keypad Fire Buttons (B), and Zones greater than 10 (D)

4-2 Communication Reports

The table below is a complete list of the hexadecimal characters sent using the DMP 4-2 communication

format.

1st

Digit

1st Digit Description 2nd Digit 2nd Digit Description

1 Fire Alarm 1 to A, B, D Zones 1 to 10, Keypad Fire Buttons, and Zones greater than 10

2 Panic Alarm 1 to A, B, D Zones 1 to 10, Ambush, and Zones greater than 10

3 Burglary Alarm 1 to A, B, D Zones 1 to 10, Keypad Police Buttons, and Zones greater than 10

4 Emergency Alarm 1 to A, B, D Zones 1 to 10, Keypad Emergency Buttons, and Zones greater

than 10

5 Supervisory Alarm 1 to A, D Zones 1 to 10, and Zones greater than 10

6 Aux 1, Aux 2, or Blank Type Alarms 1 to A, D Zones 1 to 10, and Zones greater than 10

7 System Report 1 Automatic Recall

7 System Report 2 Non-AlarmOverow

7 System Report 3 ZoneAlarmOverow

7 System Report 4 System Test

7 System Report 5 Unsuccessful Remote Connect

7 System Report 6 System Recently Armed

7 System Report 7 Exit Error

7 System Report 8 Remote Programming Complete

7 System Report 9 Local Programming

7 System Report A Transmit Fail

7 System Report B System Not Armed by Scheduled Time

7 System Report E Bell Circuit Trouble

7 System Report F Bell Circuit Restored

8 User Code Addition 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

8 User Code Deletion 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

8 User Code Change 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

A Zone Bypass or Force Arm 1 to A, D Zones 1 to 10, and Zones greater than 10

B Disarming 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

C Arming 1 to C, D, F Users 1 to 12, 0, and Users greater than 12

D Abort Received 1 None

E Any Zone Restoral, Reset, or System

Restoral

1 to A, B, C, D Zones 1 to 10, Battery, AC, and Zones greater than 10

F Zone Trouble, Fault, Transmitter Low

Battery or Missing, or System Trouble

1 to A, B, C, D Zones 1 to 10, Battery, AC, and Zones greater than 10

4-2 Examples

The following examples are the actual event codes a central station would receive. The full report would

also include the account number and checksum.

When the central station receives this event code It means

1A A Fire alarm is being reported on zone ten

2B An Ambush alarm is being reported

FB A battery trouble is being reported

F9 A Trouble is being reported on zone nine

1st digit of event code

sent to the receiver

Describes the event 2nd digit of event code

sent to the receiver

Denestheusernumber,zonenumber,orother

information about the event

1 2 ... 43 44 45 46 47 48 49 50 51 52

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 48

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20