Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 52)

800-641-4282

www.dmp.com

Made in the USA

INTRUSION • FIRE • ACCESS • NETWORKS

2500 North Partnership Boulevard

Springfield, Missouri 65803-8877

8331

14.12 Common Keypad Messages

Message Meaning Possible Solutions

INVALID CODE

The user code you have entered is not

recognized by the system.

Check the user code and try again.

CLOSING TIME

(XR20/XR40 Only)

The schedule has expired but the system has

not been armed.

Users still on the premise should arm the system or

extend the schedule to a later time.

AC TROUBLE The system is not getting proper power. Check that the AC connections are good.

BATTERY

TROUBLE

The battery is either low or missing.

Check that the battery connections are good and

the battery is still good.

SYSTEM TROUBLE

SERVICE

REQUIRED

There is a problem with one or more

components in the system.

MakesuretheJ16jumperisremovedfromthe

panel. Make sure there is not a short or open

condition on the green data wire to the keypad.

You may also need to check that all of the keypads

and expansion modules on the bus are good.

SYSTEM BUSY

The system is performing another task with a

higher priority.

Wait a few moments for the system to complete the

task.MakesuretheJ16jumperisnotonthepanel.

If the message displays for a long period of time,

the processor could be locked up.

NON-POLLED

ADDRESS

(770 Keypad only)

Remote programming is in progress or the

keypad address is not programmed correctly.

Adjustkeypadaddresstotheappropriatenumber

for the panel type.

TRANSMIT FAIL

The panel has attempted to communicate

with the central station 10 times and has not

succeeded.

Verify your communication type, account number,

and phone number. Make sure the telephone line is

connected and working properly.

ENTER CODE

(When entering

Programming)

A lockout code has been programmed for the

panel.

Enter the lockout code.

WIRELESS

TROUBLE

The panel is unable to communicate with the

wireless receiver.

Verify the receiver is properly connected to the panel.

Verify the correct House Code is programmed in

System Options.

The wireless receiver is missing.

Listings and Approvals

ANSI/SIA CP-01-2000 False Alarm Reduction

California State Fire Marshal (CSFM)

FCC Part 15

FCC Part 68 Registration ID CCKUSA-18660-AL-R

Underwriters Laboratories (UL) Listed

ANSI/UL 365 Police Connected Burglar

ANSI/UL 609 Local Burglar

ANSI/UL 1023 Household Burglar

ANSI/UL 1076 Proprietary Burglar

ANSI/UL 1610 Central Station Burglar

ANSI/UL 985 Household Fire Warning

Standard Line Security with Model iCOMSL

1 2 ... 47 48 49 50 51 52

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 52

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20