Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 26)

XRSuper6/XR20/XR40 Programming Guide

Digital Monitoring Products www.dmpnet.com 2500 N. Partnership Boulevard Springfield, MO 65803

9.1 ZONE INFORMATION

This allows you to define the operation of each protection zone used in the system.

A description of each programming option follows:

9.2 ZONE NUMBER

Enter the number of the zone you intend to program. Press COMMAND to enter a

zone name. Refer to the Enter Alpha Characters section for information on entering

zone names.

9.3 ZONE NAME

Press the Select key and enter up to 16 characters for the zone name. A name must

be given to each zone in the system. This name can be displayed at the keypads

when the zone is bad or viewed in Display Events. The zone name is also sent to the

receiver as part of a zone event report.

A zone that is not part of the system must be marked *UNUSED*. To mark a zone

unused, delete the old name by pressing a top row Select key, then press the

COMMAND key. The programmer automatically programs the name as * UNUSED *.

If you selected ZONES? NO YES to clear the panel's memory during Initialization, the

zones will already be marked * UNUSED *. See the Initialization section.

9.4 ZONE TYPE

The Zone Type defines the panel's response to the zone being opened or shorted.

See the Zone Types Specifications chart.

When you assign a Zone Type to a zone, responses are made automatically for the

zone. There are 11 Zone Types to choose from including Blank. The functional

details of each response are described in Zone Types Specification.

To enter a new Zone Type, press a top row Select key. The display lists the four

Zone Types shown below.

Blank, Night, Day, or Exit. Press COMMAND to display additional zone types.

Fire, Panic, Emergency, or Supervisory. Press COMMAND to display additional zone

types.

Auxiliary 1, Auxiliary 2, Fire Verify, or Arming. Press the ARROW key to display the

previous zone types.

When the Zone Type you want to select is displayed, press the Select key beneath its

name. The chart in section 9.4A gives an outline of the Alarm Action for each Zone

Type.

If you select Blank, Night, Day, Exit, Auxiliary 1, or Auxiliary 2 as the Zone Type, the

zone must be assigned to an area.

If you select Fire, Panic, Emergency, or Supervisory as the Zone Type, these are 24-

hour zones that are always armed and no area assignment is needed. Press

COMMAND to continue.

Refer to the Appendix section in this guide for zone type descriptions.

ZONE INFORMATION

ZONE NO: –

ZONE INFORMATION

* UNUSED *

– – NT DY EX

F I PN EM SV

A1 A2 FV AR

ZONE TYPE: BLANK

Address

XRSuper

XR20

XR40

Zone # Zone # Zone #

Panel

N/A

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 26

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XR20