Digital Monitoring Products XR20 Guida di Installazione Scaricare il pdf (Pagina 30)

XRSuper6/XR20/XR40 Programming Guide

Digital Monitoring Products www.dmpnet.com 2500 N. Partnership Boulevard Springfield, MO 65803

9.9 DISARMED OPEN

Defines the action taken by the panel when the zone is opened while the area is

disarmed. There are three actions to define:

Message to Transmit

Output Number

Output Action

You must also make these selections for the Disarmed Short, Armed Open, and

Armed Short zone conditions. Press the COMMAND key to continue.

9.9A MESSAGE TO TRANSMIT

You can send two report types to the receiver: Alarm and Trouble. These are

represented by the characters A and T. Press any top row Select key to display the

zone's report options.

ALARM - Selecting A, allows an alarm report to be sent to the receiver and the bell

output to activate according to zone type. See the Bell Action section. The zone

name appears in the panel's alarmed zones status lists.

TROUBLE - Selecting T allows a trouble report to be sent to the receiver and the

zone name to appear in the panel's alarmed zones status lists.

LOCAL - When you select L, an alarm report is NOT sent to the receiver. The bell

output still activates according to zone type and the zone name appears in the

panel's alarmed zones status lists. NOTE: If Pager is YES in Communication, the

alarm report is also sent to the designated pager.

– (dash) - When you select – , reports are NOT sent to the receiver. The bell output

does not activate and there is no display in the panel's alarmed zones status list.

Only the programmed Output Number activates.

9.9B OUTPUT NUMBER

You can specify any of the outputs on the XRSuper6/XR20/XR40 to be activated by a

zone condition. The output can be activated regardless of the report to transmit or

whether or not the zone is programmed as local. An output activated by a non-24

hour armed zone is turned off when the zone's area is disarmed by a user.

To enter an Output Number, press a top row Select key followed by the output

number 1 to 4. Press the COMMAND key.

ZONE INFORMATION

OUTPUT NO: 0

A T L -

MSG: TROUBLE

DISARMED OPEN

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Nessun commento

Digital Monitoring Products XR20 Guida di Installazione Pagina 30