Digital Monitoring Products XTL Series Guida di Installazione Scaricare il pdf (Pagina 13)

Digital Monitoring Products XTL/XTLC Programming Guide

COMMUNICATION

Communication

3.1 Communication

The Communication section allows you to congure the communication settings for the

XTL/XTLC panel. After choosing the Communication Type, continue through the list of

options.

3.2 Account Number

Enter the account num ber sent to the receiver.

The range of account numbers are 1 to 65535. For account numbers of four digits or

less, you do not have to enter leading zeros. The panel automatically right justies the

account number.

3.3 Transmission Delay

Enter the number of seconds (15 to 45 seconds) the panel waits before sending burglary

alarm reports to the receiver. The wireless siren and relay outputs are not delayed during

this period. Enter 0 (zero) to disable this function. The default is 30.

3.4 Communication Type

This species the communication method the panel uses to contact the receiver. Press

any Select key to display the following communication options:

CELL - Cellular communication to DMP Model SCS-1R or SCS-VR Receivers.

NONE - For local systems. Selecting this ends communication programming.

Note: XTLC cellular communication must be activated using the Activate Cell option

provided in section 17.4 Diagnostics Function located in the Appendix.

3.5 Test Time

Press COMMAND to enter the Test Time. Enter the time of day the panel sends the test

report to the SCS-1R Receiver. Use entries between 12:00 to 11:59 and then choose AM

or PM.

3.6 Test Days

Enter how often the panel test report is sent to the receiver. Enter from 1 to 60 days.

Enter zero to disable the test report

Default is 1 (one) day. This option only displays if a

test time is entered.

3.7 Cell Check In

Check-in reports are a method of supervising the panel for communication with the

receiver.

Enter the number of minutes between check-in reports. Select from 0 or 3-240 minutes.

Enter 0 (zero) to disable the check-in option. Default is 0.

Note: If Cell Check-in option is used, additional cell charges may apply.

3.8 Fail Time

Fail Time allows the SCS-1R or SCS-VR receiver to miss a dened number of check-ins

before logging that the panel is missing. For example, if CELL CHECKIN is 20 and FAIL

TIME is 30, the SCS-1R receiver only indicates a Panel Not Responding after 30 minutes.

The FAIL TIME must be equal to or greater than the CELL CHECKIN minutes: If the

CHECKIN is 20 minutes, the FAIL TIME must be 20 or more. The maximum FAIL TIME is

240 minutes. Select from 0 or 3-240 minutes. The default FAIL TIME is 240 minutes.

Closing Wait operation: Closing Wait operation is activated if Fail Time is set

to 3 minutes and O/C Reports in System Reports is YES and O/C User reports in

Communication Programming is set to YES.

Closing Wait provides a delay time before a monitored system arms until the panel

receives an acknowledgment of the closing report from the central station receiver.

During the delay, the keypad displays ONE MOMENT . . . Once the closing is

acknowledged from the SCS-1R receiver, the keypad buzzes for one second and then

displays an armed status message. If the primary communication fails, the message

LOCAL ALARM ONLY appears.

3.9 First GPRS APN (XTL Only)

Enter the rst APN (Access Point Name). This allows an access point for cellular

communication and is used to connect to a DNS network. The APN may contain two lines

of 16 characters to equal 32 characters. Default is set to SECURECOM400.

COMMUNICATION

ACCOUNT NO:

XMIT DELAY: 30

COMM TYPE: CELL

CELL NONE

TEST TIME

00:00 AM PM

CELL CHECKIN: 0

FAIL TIME: 240

SECURECOM400

FIRST GPRS APN

CELL TST DAYS: 1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 48 49

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XTL Series Guida di Installazione Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XTL Series