Digital Monitoring Products XTL Series Guida di Installazione Scaricare il pdf (Pagina 20)

XTL/XTLC Programming Guide Digital Monitoring Products

SYSTEM REPORTS

System Reports

7.1 System Reports

This function allows you to select the reports the XTL/XTLC sends to the receiver.

7.2 Opening/Closing Reports

NO - No Opening/Closing Reports are sent.

YES - Sends Opening/Closing Reports for each programmed area.

7.3 Abort Reports

YES allows the panel to send an Alarm Abort Report to the receiver any time an area is

disarmed during Transmit Delay before an alarm report is sent and the Bell Cutoff Time

has not expired. See the Bell Cutoff section. The area must be disarmed and no zones

that were in alarm can still be armed.

YES also allows a Bell Silenced Report to be sent if the alarm bell is silenced with a valid

user code during an alarm. Default is NO.

Note: Alarm Cancel or Verify Reports are sent if the alarm is canceled or veried after

being sent to the alarm receiver, if the Bell Cutoff timer has not expired. The Abort

Reports option does not affect Cancel or Verify reports.

The panel will not send Abort reports for Fire zones, or Supervisory-type zones.

7.4 Zone Restoral Reports

This option allows you to specify whether the panel sends zone restoral reports and

when they will be sent.

NO - Restoral reports are not sent by the panel.

YES - The panel always sends zone restoral reports at the time the zone restores from

an alarm or trouble condition.

DISARM - The panel sends zone restoral reports when a zone that has restored from an

alarm or trouble is disarmed. Twenty-four hour zones send restorals immediately.

7.5 Bypass Reports

YES allows the panel to send all zone bypass, reset, and force arm reports to the

receiver. The bypass report includes the zone number, zone name, and the user number

of the individual bypassing the zone.

7.6 Code Change Reports

YES allows the panel to send all code additions, changes, and deletions to the receiver.

The code change report includes the user number added or deleted and the user number

of the individual making the change.

7.7 Ambush

YES allows an ambush report to be sent any time user code number one is entered at a

keypad. Selecting NO disables the ambush report and allows user code number one to

operate the same as all other codes.

7.8 Late To Open

Enter 1-240 as the number of minutes to elapse that the system may remain armed after

the opening time of a schedule without sending a Late To Open message. If the system

continues to be armed after the Late to Open minutes expire, a Late To Open message is

sent to the central station. Default is 0, which disables the Late To Open option.

7.9 Early To Close

Enter 1-240 as the number of minutes that the system can be armed prior to the

scheduled closing time. If the system is armed prior to the Early to Close minutes, an

Early To Close message is sent to the central station. Default is 0, which disables the

Early to Close option.

SYSTEM REPORTS

O/C RPTS NO

NO YES

ABORT NO YES

RESTORAL YES

NO YES DISARM

BYPASS NO YES

CODE CHG NO YES

AMBUSH NO YES

LATE TO OPEN

EARLY TO CLOSE

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XTL Series Guida di Installazione Pagina 20

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XTL Series