Digital Monitoring Products XTL Series Guida di Installazione Scaricare il pdf (Pagina 41)

Digital Monitoring Products XTL/XTLC Programming Guide

APPENDIX

Cell Roaming Indicator on XTLC

The Cellular Signal Strength option in the panel’s Diagnostic menu contains a roaming

indicator. When the XTLC is roaming or not in contact with a Verizon owned tower, ROAM

will be displayed on the top line of the keypad along with the signal strength. To

perform the cellular activation process from a keypad, the panel MUST be in contact

with a Verizon owned tower. If the cellular communicator is in contact with a tower

owned by another network, ROAM and the signal strength displays, but activation cannot

be completed. This feature can be used as a diagnostic tool to troubleshoot activation

issues.

Cellular Activation

Activation for XTL

1. In Remote Link panel communication programming, select

Cellular Network as the Communication Type and select the

Activate button. See Figure 4.

2. In the Activate SIM/MEID window, enter the SIM number, found on

the SIM card.

3. Select the rate plan for the XTL. See Figure 5.

4. Select the Activate button at the bottom of the

window.

Activation for XTLC

1. In Remote Link panel communication programming,

select Cellular Network as the Communication Type

and select the Activate button. See Figure 4.

A. In the Activate SIM/MEID window, enter the

MEID number, found on the XTLC label.

B. Select the rate plan for the XTLC.

See Figure 5.

C. Select the Activate button at the bottom of

the window.

2. After the XTLC is installed at the site, use a keypad

and enter the panel’s Diagnostics menu (2313). Press COMMAND until you reach the Activate Cell menu.

A. Select ACTIVATE CELL by pressing a top row Select Key.

B. Press the button beneath YES on the next screen to activate the device.

Note: The ACTIVATE CELL option will only display if a CDMA modem is installed

and a Verizon Cellular Tower must be in contact with XTLC or activation

cannot be completed.

Panel Settings

Hitting a top row key allows access to the Serial Number, Panel Model, and Firmware Version.

Serial Number

This number is the panel serial number. Reference this number for date-of-manufacture,

hardware version, etc. Press the COMMAND key to view the next option.

Panel Model

This menu option displays the panel model.

Firmware Version

This menu option displays the Firmware Version number of the panel and date it was released.

Z-Wave Test Option

This feature allows the installer to test panel communication with Z-Wave devices. A

successful test indicates a response from a device. Press any top row Select key to view

the Z-Wave Device List.

Press COMMAND to advance through each Z-Wave device and press any top row Select

key to begin the test on the device displayed.

The name of the device displays above the device number. The current number of

successful communications followed by the total number of attempts displays to the

right of the device number. The test stops after 99 attempts.

Press COMMAND to view the nal number of successful communications.

Exiting the Diagnostics program

Press the COMMAND key until STOP displays. Press any Select key. The keypad returns to the Status List display.

ROAM -XX dBm

SIGNAL:

▐▐▐▐▐▐▐

ACTIVATE CELL

SURE NO YES

TEST ZWAVE

DEVICE LIST:

HALLWAY LIGHT

LIGHT 02 0/0

HALLWAY LIGHT

99/99 SUCCESSFUL

Figure 5: Activate SIM/MEID

Figure 4: Remote Link Activation

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XTL Series Guida di Installazione Pagina 41

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XTL Series