Digital Monitoring Products XTL Series Guida di Installazione Scaricare il pdf (Pagina 35)

Digital Monitoring Products XTL/XTLC Programming Guide

ZONE INFORMATION

Action options. To view more options press the COMMAND key.

ARM (Arm) - Arms selected areas and force arms bad zones.

DIS (Disarm) - Disarms selected areas.

TGL (Toggle Arm) - Toggles arm/disarm for selected areas and force arms bad zones

when arming.

STA (Status) - Causes the key fob LED to indicate the arm/disarm status of the system.

PN (Panic) - Triggers a Panic zone type alarm with no restoral.

PN2 (Panic 2) - Triggers a Panic zone type alarm with no restoral when pressed

simultaneously with any other Panic 2 button. No action occurs when pressed alone.

EM (Emerg) - Triggers an Emergency zone type alarm with no restoral.

EM2 (Emerg 2) - Triggers an Emergency zone type alarm with no restoral when pressed

simultaneously with any other Emergency 2 button. No action occurs when pressed

alone.

OUT (Output) - Causes an output to turn on steady, pulse, momentary, toggle or off.

RST (Sensor Reset) - Causes the panel to perform a standard Sensor Reset.

UN (Unused) - The button is not used and performs no action.

13.11

.8 Button Press Time

This option species the amount of time (SHORT or LONG) the user must press the

button before the key fob sends a message to the wireless receiver. The default press

time displays. Press any Select key to set the Button Press Time for Arm, Disarm, Toggle,

Status, Output, and Sensor Reset.

Note: The Button Press Time is not programmable on Panic (PN or PN2), Emergency (EM

or EM2) or Unused (UN) zones. For those zones the button press time is always two (2)

seconds.

SHORT - Press the button for one-half (1/2) second to send the message to the wireless

receiver.

LONG - Press the button for two (2) seconds to send the message to the wireless

receiver.

13.11

.9 Arm/Disarm Area Selection

For Area systems, enter the areas 1 to 6, to be armed/disarmed by the Key Fob button

being programmed.

This species the area to be armed by the Key Fob button being programmed.

For All/Perimeter systems, choose PERIM or ALL.

For Home/Sleep/Away or Home/Away systems, choose HOME, SLEEP, or AWAY.

After selecting the areas, for one-button key fobs the Zone No.: option displays. For

two-button or four-button key fobs, the Key Fob Button Selection option displays to

program additional buttons.

13.11

.10

Output Number

You can specify a wireless output/Favorite to operate when OUT (Output), PN (Panic),

PN2 (Panic 2), EM (Emergency), or EM2 (Emergency 2) is selected for a key fob Button

Action and the button is pressed. Valid range is 31-34, 41-44, and F01-F20. For an output

turned on by a PN, PN2, EM, or EM2 button action, the output turns off when any area is

disarmed.

To enter an output number, press a top row Select key followed by the output number.

Press the COMMAND key.

13.11

.11

Output Action

This option allows you to dene the output action (STD, PLS, MOM, TGL, OFF) for the

selected output number. The default is Steady.

STD (Steady) - The output is turned on and remains on.

ARM DIS TGL STA

PN PN2 EM EM2

OUT RST UN

PRESS TIME: XXXXX

SHORT LONG

AREA: 1 2 3 4 5 6

ARM AREAS: PERIM

OUTPUT NO: 0

ACTION:

STD PLS MOM TGL

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 48 49

Commenti su questo manuale

Nessun commento

Digital Monitoring Products XTL Series Guida di Installazione Pagina 35

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Digital Monitoring Products XTL Series