Digital Monitoring Products XTL Series Guida di Installazione Scaricare il pdf (Pagina 15)

Digital Monitoring Products XTL/XTLC Programming Guide

COMMUNICATION

3.24 Test Report

YES enables the Recall Test report to be sent to this receiver. Default is NO.

3.25 First IP Address

Enter the rst (primary) IP address where the panel sends cell messages. Enter all

12 digits and leave out the periods. For example, enter IP address 192.168.0.250 as

192168000250. The periods display automatically.

The message is sent using rst GPRS APN and the rst IP Address. If no acknowledgment

is received, rst GPRS APN and the second IP address are used, followed, if needed, by

second GPRS APN and rst and second IP addresses, respectively.

3.26 First IP Port

Enter the rst IP port number to be used in conjunction with the First IP Address. The

IP port identies the port used to communicate messages to and from the panel. The

default IP Port setting is 2001.

3.27 Second IP Address

Enter the second IP address where the panel sends cell messages. Enter all 12 digits and

leave out the periods. For example, enter IP address 192.168.0.250 as 192168000250.

The periods display automatically.

3.28 Second IP Port

Enter the second IP port number to be used in conjunction with the second IP Address.

The IP port identies the port used to communicate messages to and from the panel.

The default IP Port setting is 2001.

TEST RPT NO YES

FIRST IP ADDR

000.000.000.000

FIRST IP PORT

2001

SECOND IP ADDR

000.000.000.000

SECOND IP PORT

2001

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 48 49

Nessun commento

Digital Monitoring Products XTL Series Guida di Installazione Pagina 15